Fits the tools you already run
Our cutters are made to fit our own hole openers and reamers and can be machined to match a third-party body. If you send a drawing or a worn cutter, we will measure it and quote a replacement rather than a whole new assembly.
Send the cutter size, the formation and how many you need. Our engineers quote within 6 working hours (Mon-Sat, GMT+8).
Roller cutters are the replaceable cutting assemblies that do the work on hole openers, raise boring heads and large-diameter piling tools. We machine the cutter body, press in the bearings and build the cone with the same inserts we use on our tricone bits, so a cutter can be rebuilt or matched to the ground you are drilling.
What we make
- Spare cutters for hole openers — matched to your existing body, 8 to 48 in assemblies.
- TCI roller cutters — chisel, conical and scoop inserts for medium to hard formations.
- Steel tooth cutters — milled and hardened teeth for soft clay, shale and sand.
- Rebuild service — worn cutters re-coned and re-bearinged instead of scrapped.
Matching a cutter to the ground
Hard, abrasive rock wants a TCI cutter with a dense insert pattern and a sealed bearing. Mixed ground and cobble need a heavier body with fewer, larger cutters so the assembly does not bounce. Soft ground runs cooler and faster with a steel tooth cutter, but wears quickly, so the cost per metre usually decides it. Send the pilot size, the final diameter and the formation and we will quote the cutter type with the assembly.
Fits the tools you already run
Our cutters are made to fit our own hole openers and reamers and can be machined to match a third-party body. If you send a drawing or a worn cutter, we will measure it and quote a replacement rather than a whole new assembly.
Send the cutter size, the formation and how many you need. Our engineers quote within 6 working hours (Mon-Sat, GMT+8).
